Free stencils / Rose

Rose tattoo stencil: an open rose seen from above, drawn as black outlines of overlapping petals spiralling in to the centre

Rose tattoo stencil

An open rose seen from directly above: the edges of the outer petals and the layers that spiral in to the centre. There is no stem and no leaf, and no shading, so it works as an outline to build on.

Printed size
12 × 11.6 cm (4.7 × 4.6 in)
Line width
about 0.6 mm
File
PNG, 300 dpi, pure black on white

Free, no account. Print the page at 100% scale and the design comes out at the size above.

Change the size, thicken the lines or mirror it in the stencil maker

What is in this stencil

The trace kept the edge of each petal and left the surfaces empty. Some inner edges stop short where one petal faded into the next in the photo, which leaves you room to close or shade them your own way.

The lines are thin. The stencil maker estimates them at about 0.4 mm at 8 cm wide, under the 0.5 mm that stencil paper transfers reliably, so the download here is set to 12 cm. For a smaller rose, open it in the stencil maker and raise the line thickness.

Sizes and line widths

The same stencil at each width the stencil maker offers, with its estimate of how thick the lines print. About 0.5 mm is the practical minimum for stencil paper.

Printed sizeLines
5 × 4.8 cm2.0 × 1.9 inabout 0.3 mmLines this thin often fail to transfer. Raise the line thickness in the stencil maker.
8 × 7.7 cm3.1 × 3.0 inabout 0.5 mm
12 × 11.6 cm4.7 × 4.6 inabout 0.6 mmThe size of the download on this page.
15 × 14.4 cm5.9 × 5.7 inabout 0.6 mm
19 × 18.3 cm7.5 × 7.2 inabout 0.7 mm

Where it came from

The photo this stencil was traced from: a pink and white rose in full bloom, photographed from above

This stencil was traced from a photo of a pink and white rose in full bloom, photographed from above, taken by Chris Linnett and shared on Unsplash. The photo was cropped to the subject and run through the Stenciline stencil maker at its standard settings. No lines were added or redrawn by hand.

You can do the same with any photo or drawing of your own.

Questions

Is this rose stencil free to use?

Yes. Download it, print it and tattoo it, for yourself or for clients. It was traced from a photo by Chris Linnett published under the Unsplash License, which allows free use, including commercial use.

How do I print it at the right size?

Download the A4 or US Letter page and print it on that paper at 100% scale ("actual size"), not "fit to page". The design should then measure 12 cm across. Run the printed sheet through a thermal printer, or trace it by hand onto stencil paper.

Can I get it bigger, smaller or mirrored?

Yes. Open it in the stencil maker, where you can change the print width, thicken the lines, mirror it for transfer and download the page again. Nothing is uploaded when you do this.

More stencils

Make one from your own photo

Upload a photo or a drawing and get a stencil like this one at the size you need. Free, no account.

Open the stencil maker