Free stencils / Eagle

Eagle tattoo stencil: the head and shoulders of a bald eagle in profile, with the hooked beak, the eye and brow, and the neck feathers falling over the dark shoulder

Eagle tattoo stencil

A bald eagle seen from the side: the hooked beak, the eye under its heavy brow, and the white head feathers breaking into the darker feathers of the shoulder.

Printed size
12 × 7.9 cm (4.7 × 3.1 in)
Line width
about 0.6 mm
File
PNG, 300 dpi, pure black on white

Free, no account. Print the page at 100% scale and the design comes out at the size above.

Change the size, thicken the lines or mirror it in the stencil maker

What is in this stencil

The beak and the eye are closed, clean shapes. The white head has few lines of its own, so it reads as open skin between the beak and the shoulder.

The shoulder feathers are drawn as short overlapping strokes and need room: 10 cm and up keeps them apart.

Sizes and line widths

The same stencil at each width the stencil maker offers, with its estimate of how thick the lines print. About 0.5 mm is the practical minimum for stencil paper.

Printed sizeLines
5 × 3.3 cm2.0 × 1.3 inabout 0.4 mmLines this thin often fail to transfer. Raise the line thickness in the stencil maker.
8 × 5.3 cm3.1 × 2.1 inabout 0.5 mm
12 × 7.9 cm4.7 × 3.1 inabout 0.6 mmThe size of the download on this page.
15 × 9.9 cm5.9 × 3.9 inabout 0.6 mm
19 × 12.5 cm7.5 × 4.9 inabout 0.7 mm

Where it came from

The photo this stencil was traced from: a bald eagle in profile

This stencil was traced from a photo of a bald eagle in profile, taken by USFWS and shared on Flickr. The photo was cropped to the subject and run through the Stenciline stencil maker at its standard settings. No lines were added or redrawn by hand.

You can do the same with any photo or drawing of your own.

Questions

Is this eagle stencil free to use?

Yes. Download it, print it and tattoo it, for yourself or for clients. It was traced from a photo by USFWS released into the public domain, so it is free to use, including commercially.

How do I print it at the right size?

Download the A4 or US Letter page and print it on that paper at 100% scale ("actual size"), not "fit to page". The design should then measure 12 cm across. Run the printed sheet through a thermal printer, or trace it by hand onto stencil paper.

Can I get it bigger, smaller or mirrored?

Yes. Open it in the stencil maker, where you can change the print width, thicken the lines, mirror it for transfer and download the page again. Nothing is uploaded when you do this.

More stencils

Make one from your own photo

Upload a photo or a drawing and get a stencil like this one at the size you need. Free, no account.

Open the stencil maker