Free stencils / Anatomical heart

Anatomical heart tattoo stencil: an anatomical human heart from an old engraving, with the vessels at the top and the veins running over the surface

Anatomical heart tattoo stencil

An anatomical heart from an old engraving: the great vessels at the top and the veins branching across the muscle.

Printed size
12 × 12 cm (4.7 × 4.7 in)
Line width
about 0.7 mm
File
PNG, 300 dpi, pure black on white

Free, no account. Print the page at 100% scale and the design comes out at the size above.

Change the size, thicken the lines or mirror it in the stencil maker

What is in this stencil

The source is an engraving, so its shading lines come through as hatching.

For an outline-only heart, lower Detail in the stencil maker.

Sizes and line widths

The same stencil at each width the stencil maker offers, with its estimate of how thick the lines print. About 0.5 mm is the practical minimum for stencil paper.

Printed sizeLines
5 × 5 cm2.0 × 2.0 inabout 0.5 mm
8 × 8 cm3.1 × 3.1 inabout 0.7 mm
12 × 12 cm4.7 × 4.7 inabout 0.7 mmThe size of the download on this page.
15 × 15 cm5.9 × 5.9 inabout 0.7 mm
19 × 19 cm7.5 × 7.5 inabout 0.9 mm

Where it came from

The photo this stencil was traced from: an old engraving of a human heart

This stencil was traced from a photo of an old engraving of a human heart, taken by rijksmuseum and shared on rawpixel. The photo was cropped to the subject and run through the Stenciline stencil maker at its standard settings. No lines were added or redrawn by hand.

You can do the same with any photo or drawing of your own.

Questions

Is this anatomical heart stencil free to use?

Yes. Download it, print it and tattoo it, for yourself or for clients. It was traced from a photo by rijksmuseum published under CC0, a public-domain dedication, so it is free to use, including commercially.

How do I print it at the right size?

Download the A4 or US Letter page and print it on that paper at 100% scale ("actual size"), not "fit to page". The design should then measure 12 cm across. Run the printed sheet through a thermal printer, or trace it by hand onto stencil paper.

Can I get it bigger, smaller or mirrored?

Yes. Open it in the stencil maker, where you can change the print width, thicken the lines, mirror it for transfer and download the page again. Nothing is uploaded when you do this.

More stencils

Make one from your own photo

Upload a photo or a drawing and get a stencil like this one at the size you need. Free, no account.

Open the stencil maker